Skip to main content

AI Development | Technology Consulting Company Australia

Unlock your business’s full potential with Avenue Group Australia

background

Blog

Microsoft Dynamics 365
Partner or Dynamics 365 Consultant? What You’re Really Hiring

microsoft dynamics 365 partner

The minute a business begins their quest for Microsoft Dynamics 365 services, the terminology gets murky very quickly. “Dynamics 365 partner.” “Dynamics 365 consultant.” “Implementation specialist.” Sometimes they mean the same thing. Often, they don’t.

That can make a bigger difference than you might think. Miss it and you may find yourself working with an outstanding individual spread thin across a task that requires a team, or a large team that’s way too much for a small task. So, before you decide on a Microsoft Dynamics 365 Partner or go through the process of quoting, take a few moments to understand exactly who you’re hiring.

How hiring a Dynamics 365 partner is different in 2026?

Well, it wasn’t too complicated a few years ago. Setup, migration, training and then you leave. Important still. However, Microsoft keeps adding Copilot, AI Agents, Automation and Power Platform capabilities to Dynamics 365, so the Dynamics 365 platform that you deploy now will be different in two years.

It implies that now the question that you must ask yourself is no longer “who will help us deploy Dynamics 365? but “Who can help us keep on leveraging Dynamics 365?”

It lies in the very core of your preference for a Dynamics 365 Consultant or a Microsoft Dynamics 365 Partner that there is far more to it than the mere ability to go live.

Dynamics 365 partner vs Dynamics 365 consultant: what's the difference?

A Dynamics 365 consultant is usually one person (or at best a small company of just a few people), who is an expert in a specific field like finance configuration, reports or other modules.

A Microsoft Dynamics 365 partner, however, is a business that employs a whole range of people: project managers, consultants, developers, data migration experts, trainers, etc., who operate under the partner program of Microsoft.

It might be helpful to consider it this way:

Dynamics 365 consultantMicrosoft Dynamics 365 partner
Best forTargeted advice, health checks, small changesFull implementations, migrations, ongoing support
Team depthOne or two skill areasA team covering the full project lifecycle
ContinuityDepends on one person's availabilityCover for leave, turnover and busy periods
AccountabilityFor their own piece of workFor the outcome of the whole project
Common riskStretched across too many rolesToo heavy for a very small task

Neither is better in every situation. The trick is matching the help to the job.

When a Dynamics 365 consultant is enough?

In such cases, an independent consultant may prove to be an excellent option. Some examples include:

  • ➔ A second opinion on a proposal you have already received

  • ➔ An audit of an existing Dynamics 365 system

  • ➔ A simple report, dashboard, or small configuration modification

  • ➔ Temporary replacement of a missing member of your team

In case you are sure about what you want and it falls into one person's competence, there is no point in complicating things.

When you need a Microsoft Dynamics 365 partner?

Things start looking different when the project includes a new system, a migration project, multiple modules or multiple teams. The implementation requires someone to think about finance processes, someone to build integrations, someone to clean the data, someone to train your staff and someone to keep everything on track.

There is no single individual who does all of that. And even the best individual takes time off, gets sick or moves on to work on another project. A Dynamics 365 partner provides you with a bench, not just an individual.

A Microsoft Dynamics 365 partner also brings in another dimension of accountability when something goes wrong. In the case of a partner, it is a single company which takes the ownership of the outcome, not a bunch of individuals who own their respective piece.

For Dynamics NAV, Dynamics GP or other on-premises ERP migrations, also take into account that a good Dynamics 365 partner should have the migration experience. The migration of data is relatively easy, but the challenge lies in determining what data is to be excluded.

Matching Microsoft Dynamics 365 solutions to the right partner

One thing that catches people out: "Dynamics 365" isn't one product. It's a family of Microsoft Dynamics 365 solutions, and they behave quite differently.

  • ➔ Dynamics 365 Business Central: a complete ERP system that is most preferred by small and medium enterprises.

  • ➔ Dynamics 365 Finance and Supply Chain Management: designed for bigger or more complicated enterprises.

  • ➔ Dynamics 365 customer engagement applications: Sales, Customer Service, Field Service and others.

  • ➔ Dynamics 365 Project Operations: for project or professional services companies.

Expertise in one does not guarantee expertise in the other. Therefore, don't settle for "Have you worked with Dynamics 365?" Instead ask, "How many projects have you completed using this particular application for companies like ours?" That single question says it all.

Start with the problem, not the product

Buying dialogues start off with "Does it do X?" The ideal way to open up would be, "What's holding us back?"

It could be because you input the same data into three different places. It could be that you take a week to get your month-end reports. It could even be because nobody believes the figures in your inventory or simply because there are no system integrations in your system at all. A Dynamics 365 consultant or Dynamics 365 partner would invariably link each of these challenges to a process, the capability of Microsoft Dynamics 365 solutions, and an outcome.

Watch out for people who start by listing off features. Features can be listed off easily enough. Solving your problems isn't so simple.

Configure first, customise last

The fact that Dynamics 365 can be endlessly extended is both the power of the product and the trap.

Good partners will leverage what Dynamics 365 already does out of the box, add Copilot and Power Platform where appropriate, and do custom development only where they see a business need for it. A good question to ask at the beginning of the conversation: "What would you suggest we don't customise?" The answer will speak volumes about their judgement.

What the first 90 days with a good partner should feel like?

Not every project is the same, but there are some pretty good red flags at the beginning to help figure out whether the person you are working with is doing their job right. Broadly speaking:

  • ➔ Week 1-2: they ask rather than tell. This stage includes workshops and process mapping and a lot of inquiries about how your team works in reality and not by organisational hierarchy.

  • ➔ Week 3-6: you get to see some real design. Good consultants present decisions on all that is known to this stage, and you can approve it and even see a prototype with your own data in case of Dynamics 365 project.

  • ➔ Week 6-12: you see working software. Software development should go gradually from start to finish without final surprise at the very end.

In the meantime, it is worth paying attention to how much they challenge you. A good Dynamics 365 consultant or project lead will say, “I see why you want it, but let me show you how it will backfire you."

Post go-live support: how a Dynamics 365 partner continues to add value

Go-live is a milestone, not a finish line. Microsoft continues to roll out updates, your company evolves, and new hires continue to come on board.

A proper partner will be able to assist you in implementing all the necessary features, providing good performance, training your staff, and analyzing both successful and unsuccessful practices. You can ask him how he does it. Is it through long-term support, regular inspections, or just a help desk number? This will reveal his attitude towards the partnership.

How to run a partner shortlist without losing months?

Short-listing should never become a prolonged process. Here is a fast and efficient way to short list partners.

  • ➔ Create a one-page summary. Put down your objectives, the tools you currently use, the number of users for the future system, a time frame and an estimate of the costs.

  • ➔ Select three candidates. It is sufficient quantity to compare fairly without being buried under proposals.

  • ➔ Request demonstrations based on your company's case. Present each partner a real-life situation from your practice and let them demonstrate how they would tackle it. You'll understand more than in regular demonstration.

  • ➔ Meet the real team. Don't stop at the sales rep, get to know the actual developers.

  • ➔ Call references. An interview with a past client is much better than brochures.

  • ➔ Compare assumptions and not just costs. Two quotes may be looking the same until you read assumptions behind both.

What to bring to your first conversation?

An early meeting is going to be of much greater value for you if you show up prepared, having the following ready:

  • ➔ A list of current systems that you have in place and problems with them

  • ➔ List of people who would use the new system on a daily basis

  • ➔ Your must-haves vs nice to haves

  • ➔ Your fixed deadline(s), such as the end of your fiscal year, a certain contract expiration date or end of life of current system

  • ➔ Budget range

  • ➔ Decision maker within your company who would take care of the project

The latter is often overlooked but even the most competent Microsoft Dynamics 365 partner needs a decision maker on your side who can give quick answers.

What it looks like when the match is wrong

Consider a medium-sized distribution company that employs an excellent person to implement Dynamics 365 for them. All goes well for a few months. Then the consultant gets diverted somewhere else, the data migration gets delayed, no one has trained the warehouse personnel, and the go-live date is delayed twice.

Nothing drastic occurs. The implementation just takes place late, and somewhat half-heartedly, as people maintain side sheets "just in case." Rectifying the problem afterwards becomes more expensive than getting it right initially.

The scenario is fictional, but it would be all too familiar to those who have witnessed a troubled ERP implementation. The message is not that individuals are risky, nor that big teams are always safe. The message is that the type and size of assistance must match the type and size of the project.

On the subject of price, also, a brief comment is appropriate. The most enticing price, which may end up costing the most, could be the lowest quote due to rework, unnecessary customisation, weak support, and poor user acceptance. Consider the value of the offer, as opposed to the price quoted.

How Avenue Group Australia works with you?

Here at Avenue Group Australia, we believe great projects always begin with great conversation. We would prefer telling you that a lesser scope is better for you than trying to sell you an unnecessary bigger scope of project. If a project requires a Microsoft Dynamics 365 partner, then our priorities include proper planning, software testing, training, and post go-live support.

If you require a Dynamics 365 consultant for a specific job from Microsoft Dynamics 365 or a team for a full Microsoft Dynamics 365 implementation, then we are more than glad to assist you with the decision.

Frequently Asked Questions

Is a Dynamics 365 consultant cheaper than a partner?

Yes, in case of small and clearly defined projects. In case of a complete implementation, the more affordable solution becomes the more expensive one when you include all the costs of delays and iterations. Calculate the price by summing up the entire amount, not per hour.

Do I need a Dynamics 365 partner for Business Central?

Yes, for a new project or migration. If you need some minor adjustments, you may do without a partner.

Can I switch Dynamics 365 partners mid-project?

Yes, but with additional efforts and time. Try to get the documents at the very start.

How long does a Dynamics 365 implementation take?

It depends on the software, how many modules there are to implement, how good your data is and how many entities or geographic locations you are dealing with. A targeted project can be finished within several months, but a larger multiple modules project can take longer. You have to receive an honest assessment from a partner after the discovery stage.

How is AI changing what I should expect from a Dynamics 365 partner?

Expect realistic advice on where Copilot can and cannot help in your business. Be cautious of polished demos with no clear business outcome behind them.

Chat Support
×